Trane - 16 SEER2 - 5-Ton - Multi-Speed Gas System with Variable Speed 97% Furnace (100k) With Install

    Description

    Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from Lakewood Air. This system includes a high-efficiency multi-speed air conditioner, a proven Trane gas furnace, and a matched evaporator coil — designed for year-round comfort in Lakewood's climate.

    What's Included:

    • 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling with an inverter-driven compressor, R-454B refrigerant, and durable louvered steel cabinet. 10-year parts and compressor limited warranty when registered.
    • S9V2C100U5VSB Furnace: The Trane S9V2 delivers ultra-efficient 97% AFUE heating with a variable-speed blower and variable speed draft inducer for quiet, precise temperature control. Stainless steel primary and secondary heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 100k output.
    • 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil provides efficient heat transfer in Cabinet C systems with R-454B refrigerant compatibility, factory-installed TXV for precise metering, and corrosion-resistant construction for lasting performance.

    Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.

    Professional Installation:

    • Removal & haul-off of existing equipment
    • Installation of new equipment and all included parts
    • Refrigerant line connection, evacuation & charge to OEM spec
    • Full system start-up, airflow check & operational testing
    • Permit pulled and permit fees paid with the local jurisdiction
    • Final inspection and job-site clean-up
    • Performed by a licensed, insured HVAC contractor

    Gas System Kit (Condenser & Coil + Furnace)

    • Electrical & mounting disconnect, A/C whip, condenser pad
    • Refrigerant line filter drier, locking caps, ArmaFlex insulation
    • Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg)
    • Venting flue pipe & elbow set for furnace exhaust
    • Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters)

    Not Included:

    This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate:

    • Electrical panel upgrades or new breakers beyond the standard disconnect
    • Ductwork modifications, repairs, replacement, or new runs
    • New refrigerant line set (existing line set is reused when in good condition)
    • Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included)
    • Condenser relocation to a new exterior position
    • Crane or rooftop rigging for difficult equipment access
    • Gas line extension, re-routing, or new gas line installation
    • Condensate drain line rework beyond the immediate connection at the unit
    • Thermostat upgrades (standard thermostat reuse only)
    • Asbestos abatement, mold remediation, or hazardous material handling
    • Carpentry, drywall, paint, or flooring repair after installation

    If any of the above apply to your home, our technician will evaluate on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.

    5-Year Labor Warranty:

    All installation labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.


    Bundle Size/Tonnage

    5-Ton

    Bundle Cooling Efficiency (SEER2)

    16

    Condenser Model

    5TTR7060

    Condenser Stages

    Multi-Speed

    Furnace Model

    S9V2C100U5VSB

    Furnace Stages

    Two-Stage Variable Speed

    Furnace Efficiency

    97% AFUE

    Furnace Capacity (BTU)

    100k

    Furnace Cabinet Size

    C

    Heat Source

    Gas

    Coil Model

    5TXCC009

    Coil Cabinet Size

    C

    AHRI

    216619570

    Refrigerant

    R-454B

    Warranty

    10 Year Parts, 10 Year Compressor
    (When Registered with OEM)

    RESOURCES

     

    Product form
    • Trane

    Trane - 16 SEER2 - 5-Ton - Multi-Speed Gas System with Variable Speed 97% Furnace (100k) With Install

      Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from Lakewood Air. This system includes a... Read more

      $17,660.03

        • 10 Year Parts Warranty
        • 5 Year Labor Guarantee

        Description

        Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from Lakewood Air. This system includes a high-efficiency multi-speed air conditioner, a proven Trane gas furnace, and a matched evaporator coil — designed for year-round comfort in Lakewood's climate.

        What's Included:

        • 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling with an inverter-driven compressor, R-454B refrigerant, and durable louvered steel cabinet. 10-year parts and compressor limited warranty when registered.
        • S9V2C100U5VSB Furnace: The Trane S9V2 delivers ultra-efficient 97% AFUE heating with a variable-speed blower and variable speed draft inducer for quiet, precise temperature control. Stainless steel primary and secondary heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 100k output.
        • 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil provides efficient heat transfer in Cabinet C systems with R-454B refrigerant compatibility, factory-installed TXV for precise metering, and corrosion-resistant construction for lasting performance.

        Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup.

        Professional Installation:

        • Removal & haul-off of existing equipment
        • Installation of new equipment and all included parts
        • Refrigerant line connection, evacuation & charge to OEM spec
        • Full system start-up, airflow check & operational testing
        • Permit pulled and permit fees paid with the local jurisdiction
        • Final inspection and job-site clean-up
        • Performed by a licensed, insured HVAC contractor

        Gas System Kit (Condenser & Coil + Furnace)

        • Electrical & mounting disconnect, A/C whip, condenser pad
        • Refrigerant line filter drier, locking caps, ArmaFlex insulation
        • Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg)
        • Venting flue pipe & elbow set for furnace exhaust
        • Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters)

        Not Included:

        This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate:

        • Electrical panel upgrades or new breakers beyond the standard disconnect
        • Ductwork modifications, repairs, replacement, or new runs
        • New refrigerant line set (existing line set is reused when in good condition)
        • Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included)
        • Condenser relocation to a new exterior position
        • Crane or rooftop rigging for difficult equipment access
        • Gas line extension, re-routing, or new gas line installation
        • Condensate drain line rework beyond the immediate connection at the unit
        • Thermostat upgrades (standard thermostat reuse only)
        • Asbestos abatement, mold remediation, or hazardous material handling
        • Carpentry, drywall, paint, or flooring repair after installation

        If any of the above apply to your home, our technician will evaluate on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval.

        5-Year Labor Warranty:

        All installation labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.


        Bundle Size/Tonnage

        5-Ton

        Bundle Cooling Efficiency (SEER2)

        16

        Condenser Model

        5TTR7060

        Condenser Stages

        Multi-Speed

        Furnace Model

        S9V2C100U5VSB

        Furnace Stages

        Two-Stage Variable Speed

        Furnace Efficiency

        97% AFUE

        Furnace Capacity (BTU)

        100k

        Furnace Cabinet Size

        C

        Heat Source

        Gas

        Coil Model

        5TXCC009

        Coil Cabinet Size

        C

        AHRI

        216619570

        Refrigerant

        R-454B

        Warranty

        10 Year Parts, 10 Year Compressor
        (When Registered with OEM)

        RESOURCES

         

        Recently viewed products

          Footer image

          © 2026 Lakewood Air LLC

            • American Express
            • Apple Pay
            • Diners Club
            • Discover
            • Google Pay
            • Mastercard
            • PayPal
            • Shop Pay
            • Visa

            Login

            Forgot your password?

            Don't have an account yet?
            Create account